Sewing, knitting, crochet and tapestry work used to be the housewife's pass time. As the world is changing people are adapting and you find more men trying their hand at some of the above. Especially in single parent homes. Cost of clothing has sky rocketed and people are choosing to make their own by taking up sewing. You may want to consider using a seam guide to keep that stitch straight.
To some sewing looks all too easy and not worth the time as it's not even a challenge. To others it looks altogether too complicated that they won't even bring themselves to trying. The fact of the matter is that it is not extremely hard, but by no means is it super easy, especially to the beginner. One of the harder parts of sewing is keeping a straight seam.
The guide is a steal plate that fits on the base of the sewing machine, where you place the material when sewing. This one has different measurements on it, from the center left and right. These measurements are identical either way so you can sew from either side with an accurate line. The measurements are taken from the point of the needle.
The guide is more often than not made out of steel. You fill find it just under the needle on the bed of the sewing machine. It has multiple measurements form the left and right of the needle. These measurements are taken from the point the needle and marked out on most common seam sizes. If the measurement you want is not showing or there is none at all, you can simply make one yourself.
This does not mean that you have to go out and buy a small plate of steel and start engraving lines and numbers on it. There is a much simpler method. Take a ruler and a fine marking pen, measure from the tip of the needle the length you require and make a mark. Then take some craft tape, preferably not clear. If you use clear tape you will be straining your eyes to see the marking. Remember to stick it down straight!
Now that you have your marking in place you are ready to get sewing. Line up your material on the chosen measurement and start sewing. Remember to keep an eye on the material and the guide to make sure you do not go off line. Go at a speed that you feel comfortable with, just remember that too fast and too slow is also a problem, you will learn as you practice.
Remember not to use clear tape as this will make it very hard for you to follow the edge as a guide. Write down the measurement used so you know for future or encase you get interrupted later on. When you have finished you can remove the tape accordingly. It's best to use a tape that is not too sticky. You do not want to have sticky residue left on your sewing machine.
If you are finding you are still going skew, you can go to your local sewing shop. There are multiple attachments and methods they can help you with. These attachments have been designed for everyone, so don't feel that you're the only person struggling. The point is to have fun so go ahead and try it out today.
To some sewing looks all too easy and not worth the time as it's not even a challenge. To others it looks altogether too complicated that they won't even bring themselves to trying. The fact of the matter is that it is not extremely hard, but by no means is it super easy, especially to the beginner. One of the harder parts of sewing is keeping a straight seam.
The guide is a steal plate that fits on the base of the sewing machine, where you place the material when sewing. This one has different measurements on it, from the center left and right. These measurements are identical either way so you can sew from either side with an accurate line. The measurements are taken from the point of the needle.
The guide is more often than not made out of steel. You fill find it just under the needle on the bed of the sewing machine. It has multiple measurements form the left and right of the needle. These measurements are taken from the point the needle and marked out on most common seam sizes. If the measurement you want is not showing or there is none at all, you can simply make one yourself.
This does not mean that you have to go out and buy a small plate of steel and start engraving lines and numbers on it. There is a much simpler method. Take a ruler and a fine marking pen, measure from the tip of the needle the length you require and make a mark. Then take some craft tape, preferably not clear. If you use clear tape you will be straining your eyes to see the marking. Remember to stick it down straight!
Now that you have your marking in place you are ready to get sewing. Line up your material on the chosen measurement and start sewing. Remember to keep an eye on the material and the guide to make sure you do not go off line. Go at a speed that you feel comfortable with, just remember that too fast and too slow is also a problem, you will learn as you practice.
Remember not to use clear tape as this will make it very hard for you to follow the edge as a guide. Write down the measurement used so you know for future or encase you get interrupted later on. When you have finished you can remove the tape accordingly. It's best to use a tape that is not too sticky. You do not want to have sticky residue left on your sewing machine.
If you are finding you are still going skew, you can go to your local sewing shop. There are multiple attachments and methods they can help you with. These attachments have been designed for everyone, so don't feel that you're the only person struggling. The point is to have fun so go ahead and try it out today.
About the Author:
You can visit www.sewverysmooth.com for more helpful information about It Is Always Nice To Have A Full Seam Guide Handy.
No comments:
Post a Comment