Surfaces must be prepared thoroughly to guarantee the highest level of purity when painting or joining. Traditional blasting methods using grit, furnace slag and sand deliver the roughness required on surfaces. However, sponge blasting method, Ohio has improved the results by reducing dust and improving the hygiene conditions at the work place. This enables you to reach the highest level of purity for the purpose of painting and coating.
An environment where sponge blasting is being used is usually free of dust. The method is fast and effective on different surfaces. A single layer is removed at a time through precise and advanced technology. Removal of the top layer or coat does not interfere with the layer beneath.
Blast technology is advanced to the extent that thin layers of finite, paint and other materials used to cover surfaces are removed without damaging the surface below. With this technology, historical buildings and monuments can easily be maintained and preserved. By achieving the high levels of precision, blast technique is appropriate for use near delicate control equipment.
Traditional methods are challenging because they produce chemical emissions and dangerous fumes. This leaves you with a messy work station where paint flakes are strewn allover. This makes traditional methods labor intensive and time consuming. You are guaranteed high quality air without fumes or moisture when you use blasting.
Environmental concerns are addressed by using the sponging technology. The machine captures the media produced from the surface which can be recycled. This makes the entire process clean and environmentally friendly. The materials are captured in real time leaving the area free of any mess.
Water is not required when using the sponging method. The operator is in full control of the equipment and will deliver on the mandate with precision. This simplifies cleaning and de-painting any surface. The work environment is free of harmful emissions and fumes which allows supervisors to monitor the work. This will improve the quality of work done.
The speed with which sponge blast clears surfaces is admirable. It works twenty times faster than using power tools or wiping. As a contractor, it is easier and faster to deliver to the expectations of your client. The mechanism is selective and thus gets rid of contaminants easily. The underlying layer is preserved as the top one is removed.
Degreasing of surfaces is effectively done without having to use strong stripping agents, water or detergents. There are no chemical runoff challenges which results in a clear working environment. The ricochet is not damaged during exfoliation. With such benefits, you can take on any assignment.
Some of the substances that can be removed using sponge blast are efflorescence, patina applied on metal, graffiti and paintings as well as environmental pollutants. Soot and char are also removed using the blast technique. Biological growth, moss and mold are also blasted.
Blasting is safe for use on bricks, fiberglass, concrete and masonry blocks. It also works effectively on copper, cast iron, tine and soft metals. It has been widely used on some hardwoods, hard metal alloys, carbon steel, granite and bronze. You may also blast sandstone and terra-cotta and achieve excellent results.
An environment where sponge blasting is being used is usually free of dust. The method is fast and effective on different surfaces. A single layer is removed at a time through precise and advanced technology. Removal of the top layer or coat does not interfere with the layer beneath.
Blast technology is advanced to the extent that thin layers of finite, paint and other materials used to cover surfaces are removed without damaging the surface below. With this technology, historical buildings and monuments can easily be maintained and preserved. By achieving the high levels of precision, blast technique is appropriate for use near delicate control equipment.
Traditional methods are challenging because they produce chemical emissions and dangerous fumes. This leaves you with a messy work station where paint flakes are strewn allover. This makes traditional methods labor intensive and time consuming. You are guaranteed high quality air without fumes or moisture when you use blasting.
Environmental concerns are addressed by using the sponging technology. The machine captures the media produced from the surface which can be recycled. This makes the entire process clean and environmentally friendly. The materials are captured in real time leaving the area free of any mess.
Water is not required when using the sponging method. The operator is in full control of the equipment and will deliver on the mandate with precision. This simplifies cleaning and de-painting any surface. The work environment is free of harmful emissions and fumes which allows supervisors to monitor the work. This will improve the quality of work done.
The speed with which sponge blast clears surfaces is admirable. It works twenty times faster than using power tools or wiping. As a contractor, it is easier and faster to deliver to the expectations of your client. The mechanism is selective and thus gets rid of contaminants easily. The underlying layer is preserved as the top one is removed.
Degreasing of surfaces is effectively done without having to use strong stripping agents, water or detergents. There are no chemical runoff challenges which results in a clear working environment. The ricochet is not damaged during exfoliation. With such benefits, you can take on any assignment.
Some of the substances that can be removed using sponge blast are efflorescence, patina applied on metal, graffiti and paintings as well as environmental pollutants. Soot and char are also removed using the blast technique. Biological growth, moss and mold are also blasted.
Blasting is safe for use on bricks, fiberglass, concrete and masonry blocks. It also works effectively on copper, cast iron, tine and soft metals. It has been widely used on some hardwoods, hard metal alloys, carbon steel, granite and bronze. You may also blast sandstone and terra-cotta and achieve excellent results.
About the Author:
You can visit www.anconstructioninc.net for more helpful information about Using Sponge Blasting Method To Clear Coated Surfaces.
No comments:
Post a Comment