Hydrogen sulfide is a colorless gas produced when organic matter is being broken down by bacteria in absence of oxygen. This procedure is usually referred to as anaerobic digestion and can occur in swamps and sewers. It can also occur naturally as natural gas or in volcanic gases. This gas has a characteristic smell of rotten eggs no wonder the foul smell usually produced by sewers. It is no wonder specialists are concerned with hydrogen sulfide reduction in the sewer system.
There are usually a lot of concerns among environmental specialists with the production of this gas in the sewage system. This is because it contributes greatly to the rust problems in the sewer structures and also people living near sewage systems always complain of odor problems. For people wondering how corrosion comes about, it results when the sulfide gas produced combines with water in the system resulting to formation of hydro sulfuric acid that corrodes infrastructure.
These negative effects of the gas to sewage system and the environment led to certain control measures to be devised. These measures were to reduce and ultimately control production of this gas. The first method of control is addition of a strong alkali such as magnesium hydroxide or sodium hydroxide to the waste water. The effect of this is increase of the sewer pH and thus limited formation of the sulfide gas.
Another way devised to control the odor problems is through addition of chemical compounds also known as chemical treatment. The most used compounds in this treatment are chlorine compounds like sodium hypochlorite, calcium hypochlorite, ferric chloride and bleach. They are added to the sewage and they oxidize the sulfides hence preventing formation of the gas.
However this addition of chemical compounds can be challenging when there is no pumping post from which the chemicals are fed into the system. Therefore a chemical feed system should be established to make this process easier. The feed system should also be monitored to ensure effective treatment system. Safety measures are usually considered when carrying out this chemical treatment.
When it comes to corrosion problems there are certain measures that are taken to reduce or prevent this. Increasing ventilation in the sewer infrastructure to prevent break down of organic matter conditions with no oxygen is one way. The other way is through the use of protective coatings on tanks and sewer pipes on their inner part. These coatings are usually composed of tar products, polythene linings, vinyl, cement, plastics and many other materials.
The other method of corrosion control is crown and manhole spraying. Usually, corrosion is worst at the crown of the pipe since the acid collects at this point. This causes the pipe to weaken and eventually collapse if the problem is persistent. Spraying a Sulfa Lock Hi Gel onto the manhole and sewer surfaces protects them from harsh effects of the acid.
The last measure is through the use of a monitoring meter known as the liquid phase sulfide meter to measure amount of sulfide in wastes that come from industries. Therefore when the sulfides are above a certain measure, the wastes have to undergo pre treatment process first they are taken to the sewer system. From this article, we learn on the different measures of hydrogen sulfide reduction in waste water collection systems. Specialists are still researching on other advanced methods to curb this problem.
There are usually a lot of concerns among environmental specialists with the production of this gas in the sewage system. This is because it contributes greatly to the rust problems in the sewer structures and also people living near sewage systems always complain of odor problems. For people wondering how corrosion comes about, it results when the sulfide gas produced combines with water in the system resulting to formation of hydro sulfuric acid that corrodes infrastructure.
These negative effects of the gas to sewage system and the environment led to certain control measures to be devised. These measures were to reduce and ultimately control production of this gas. The first method of control is addition of a strong alkali such as magnesium hydroxide or sodium hydroxide to the waste water. The effect of this is increase of the sewer pH and thus limited formation of the sulfide gas.
Another way devised to control the odor problems is through addition of chemical compounds also known as chemical treatment. The most used compounds in this treatment are chlorine compounds like sodium hypochlorite, calcium hypochlorite, ferric chloride and bleach. They are added to the sewage and they oxidize the sulfides hence preventing formation of the gas.
However this addition of chemical compounds can be challenging when there is no pumping post from which the chemicals are fed into the system. Therefore a chemical feed system should be established to make this process easier. The feed system should also be monitored to ensure effective treatment system. Safety measures are usually considered when carrying out this chemical treatment.
When it comes to corrosion problems there are certain measures that are taken to reduce or prevent this. Increasing ventilation in the sewer infrastructure to prevent break down of organic matter conditions with no oxygen is one way. The other way is through the use of protective coatings on tanks and sewer pipes on their inner part. These coatings are usually composed of tar products, polythene linings, vinyl, cement, plastics and many other materials.
The other method of corrosion control is crown and manhole spraying. Usually, corrosion is worst at the crown of the pipe since the acid collects at this point. This causes the pipe to weaken and eventually collapse if the problem is persistent. Spraying a Sulfa Lock Hi Gel onto the manhole and sewer surfaces protects them from harsh effects of the acid.
The last measure is through the use of a monitoring meter known as the liquid phase sulfide meter to measure amount of sulfide in wastes that come from industries. Therefore when the sulfides are above a certain measure, the wastes have to undergo pre treatment process first they are taken to the sewer system. From this article, we learn on the different measures of hydrogen sulfide reduction in waste water collection systems. Specialists are still researching on other advanced methods to curb this problem.
About the Author:
Read more about Important Information On Hydrogen Sulfide Reduction In Sewage System visiting our website.
No comments:
Post a Comment