Using crude oil tankers may seem easy, wait until the times comes to do the cleaning. There however are several procedures of Crude Oil Storage Tank Cleaning that have been used over the years and new improved methods that employed by some contractors. This process involves the removal of bottom sludge, separating it into oil and solid matter and the actual receptacle washing.
To start with the conventional methods, the sludge is manually removed from the tank bottom. This is done by trained personnel taking between three (3) to four (4) months. It involves both man and machines to complete the tedious process. When using solely remote operated machines, the process may take even double the time.
The second step in the conventional method is to treat the oil sludge. This involves separating the sludge into three components; recovered oil, solids and waste water. This is done inside the receptacle.
Once all this has been done, the receptacle is subjected to high pressure cleaning to wash its walls, roof and floor. A process called sand blasting is then employed so as to de-rust and d-paint the chamber. This stage can take around 50 days for one team and 30 days if two teams are working simultaneously on it. The outer walls of the storage chamber will require another 1 t o2 months de-painting and de-rusting. One can choose to sue the more expensive but effective ultra-high pressure cleaning so as to save time.
There is a one step cleaning method that has been developed and used by some companies. In this process, diesel is pumped through nozzles in a jet fixed on the receptacle's roof. This washes the sludge dissolving it after which the sludge/diesel mixture is pumped out of the storage chamber.
Even though this method is efficient and faster, some sludge still remains at the bottom of the storage chamber and requires time to dissolve. This may takes around 4 months to dissolve for a 100,000KL tank. It also requires a temporary storage tank to handle the diesel/sludge mixture pumped out of the chamber in order to clean the receptacle.
The other method is a two step washing procedure. This is very advanced and way more effective than the first two. Very fast in cleaning and recovers more crude oil in the process. The first step is the use of a rotary jet mixer that is submerged into the sludge. It thoroughly mixes the sludge suspending it in the solution and recovers about 90% of the hydrocarbons. The machine needs 7 days to set up and only 3 days to complete the mixing.
This is followed by removing the remaining 10% sludge that is then very soft in comparison to the hard crust in the other methods. Given the violent mixing it has undergone, the sludge will not be a hard task to remove. This method of Crude Oil Storage Tank Cleaning is the most efficient and very time saving comparing 6 months for other methods and 10 days it uses.
To start with the conventional methods, the sludge is manually removed from the tank bottom. This is done by trained personnel taking between three (3) to four (4) months. It involves both man and machines to complete the tedious process. When using solely remote operated machines, the process may take even double the time.
The second step in the conventional method is to treat the oil sludge. This involves separating the sludge into three components; recovered oil, solids and waste water. This is done inside the receptacle.
Once all this has been done, the receptacle is subjected to high pressure cleaning to wash its walls, roof and floor. A process called sand blasting is then employed so as to de-rust and d-paint the chamber. This stage can take around 50 days for one team and 30 days if two teams are working simultaneously on it. The outer walls of the storage chamber will require another 1 t o2 months de-painting and de-rusting. One can choose to sue the more expensive but effective ultra-high pressure cleaning so as to save time.
There is a one step cleaning method that has been developed and used by some companies. In this process, diesel is pumped through nozzles in a jet fixed on the receptacle's roof. This washes the sludge dissolving it after which the sludge/diesel mixture is pumped out of the storage chamber.
Even though this method is efficient and faster, some sludge still remains at the bottom of the storage chamber and requires time to dissolve. This may takes around 4 months to dissolve for a 100,000KL tank. It also requires a temporary storage tank to handle the diesel/sludge mixture pumped out of the chamber in order to clean the receptacle.
The other method is a two step washing procedure. This is very advanced and way more effective than the first two. Very fast in cleaning and recovers more crude oil in the process. The first step is the use of a rotary jet mixer that is submerged into the sludge. It thoroughly mixes the sludge suspending it in the solution and recovers about 90% of the hydrocarbons. The machine needs 7 days to set up and only 3 days to complete the mixing.
This is followed by removing the remaining 10% sludge that is then very soft in comparison to the hard crust in the other methods. Given the violent mixing it has undergone, the sludge will not be a hard task to remove. This method of Crude Oil Storage Tank Cleaning is the most efficient and very time saving comparing 6 months for other methods and 10 days it uses.
About the Author:
If you want the finest crude oil storage tank cleaning services, click the link to www.petro-genesis.com. To read about all of our other tank services, visit PetroGenesis Distribution on the Web today at http://www.petro-genesis.com.
No comments:
Post a Comment