More and more people are finding new uses for all things old. Many times, these old things are truly in poor shape and some believe they cannot be recycled and restored. Fortunately, there are those that do believe in all of the magic that can come out of it, and they salvage wonderful pieces of furniture that would otherwise end up in landfills. Quality furniture stripping and refinishing makes all this possible.
The key word is quality stripping. If it's not done right from the get go, there will only be problems in the refinishing stay each. Such problems would be obvious to the naked eye, making the piece look less than favorable. Therefore, it takes the steady hands and good skills, as well as top-of-the-line products that can actually bring such great results.
Many people are itching to take on such projects themselves, especially in recent years. There are so many products and tools available that simplify these types of projects, so by all means, be informed and go for it. However, should the peace be a valuable one, it's recommended to go to the professionals. This is especially true if it's an antique or sentimental piece.
Of course, this work, being so intricate and detailed, and requires so much skill is costly. There are many factors that affect the cost, such as the geographical location, the damage of the item, and so on. Others who really want to take on such a task, can do so with just common pieces of old furniture.
Before deciding to tackle such a project, one must understand that there is lots of commitment involved. There's a lot of work that goes into refinishing a wooden piece. Firstly, it starts with investigating the type of wood, as well as the type of finish. There are different products and ways of removing a finish, depending on the type that it is.
In some cases, a heat gun would be used to remove the finish, in other cases, a remover that is simply applied with a paintbrush. It is left on for a certain period of time, and then scraped off. After this step is completed, it will then be necessary to sand down the wood. This step can get quite messy, and it begins with a coarser sandpaper, which moves on to a finer one.
After all the sanding is completed, then the surface is to be wiped clean with a tack cloth. This is meant to reduce any dust that could affect the end results. The next step involves painting were staining the piece. There are a few other steps involved, and this is just an introduction to demonstrate the amount of elbow grease required to successfully complete such a project.
In the end, this new piece of furniture can bring so much pleasure into your home. For one thing, it can be a reminder of everything you're capable of doing, and something proud to show off to everyone else. This could be the beginning of a whole new hobby, or even a whole new career, as people love recycling furniture. In your home or in any other, it can add beauty and meaning like nothing else.
The key word is quality stripping. If it's not done right from the get go, there will only be problems in the refinishing stay each. Such problems would be obvious to the naked eye, making the piece look less than favorable. Therefore, it takes the steady hands and good skills, as well as top-of-the-line products that can actually bring such great results.
Many people are itching to take on such projects themselves, especially in recent years. There are so many products and tools available that simplify these types of projects, so by all means, be informed and go for it. However, should the peace be a valuable one, it's recommended to go to the professionals. This is especially true if it's an antique or sentimental piece.
Of course, this work, being so intricate and detailed, and requires so much skill is costly. There are many factors that affect the cost, such as the geographical location, the damage of the item, and so on. Others who really want to take on such a task, can do so with just common pieces of old furniture.
Before deciding to tackle such a project, one must understand that there is lots of commitment involved. There's a lot of work that goes into refinishing a wooden piece. Firstly, it starts with investigating the type of wood, as well as the type of finish. There are different products and ways of removing a finish, depending on the type that it is.
In some cases, a heat gun would be used to remove the finish, in other cases, a remover that is simply applied with a paintbrush. It is left on for a certain period of time, and then scraped off. After this step is completed, it will then be necessary to sand down the wood. This step can get quite messy, and it begins with a coarser sandpaper, which moves on to a finer one.
After all the sanding is completed, then the surface is to be wiped clean with a tack cloth. This is meant to reduce any dust that could affect the end results. The next step involves painting were staining the piece. There are a few other steps involved, and this is just an introduction to demonstrate the amount of elbow grease required to successfully complete such a project.
In the end, this new piece of furniture can bring so much pleasure into your home. For one thing, it can be a reminder of everything you're capable of doing, and something proud to show off to everyone else. This could be the beginning of a whole new hobby, or even a whole new career, as people love recycling furniture. In your home or in any other, it can add beauty and meaning like nothing else.
About the Author:
Read more about New Treasures Discovered From Quality Furniture Stripping And Refinishing.
No comments:
Post a Comment